Product Description
PE Puddle flanges perform the same as Ductile Iron (DI) Puddle Flanges. Designed for encasement in concrete, where PE passes through a structure (typically a concrete wall). Because PE is an ‘end to end system’ a PE puddle flange must withstand loads that exceed the ultimate tensile strength of the pipe, meaning Pipe fails first in a tensile pull to failure.
Puhui Industry puddle flanges are either injection moulded in PE100+ or machined from a single piece of extruded PE100+ hollow bar. They contain no welds or joints in the puddle area. (between the tapered sections).
Product Specification
| Dn | t(SDR17) | t(SDR11) | W | D5 | D4 | L3 | le | L |
| 110 | 6.6 | 10.0 | 20 | 125 | 138 | 50 | 150 | 420 |
| 125 | 7.4 | 11.4 | 20 | 132 | 157 | 50 | 150 | 420 |
| 140 | 8.3 | 12.7 | 20 | 155 | 175 | 50 | 150 | 420 |
| 160 | 9.5 | 14.6 | 20 | 175 | 200 | 50 | 150 | 420 |
| 180 | 10.7 | 16.4 | 20 | 195 | 225 | 50 | 150 | 420 |
| 200 | 11.9 | 18.2 | 20 | 232 | 250 | 50 | 150 | 420 |
| 225 | 13.4 | 20.5 | 20 | 235 | 282 | 50 | 150 | 420 |
| 250 | 14.8 | 22.7 | 20 | 285 | 313 | 50 | 250 | 620 |
| 280 | 16.6 | 25.4 | 21 | 291 | 350 | 50 | 250 | 621 |
| 315 | 18.7 | 28.6 | 24 | 335 | 394 | 50 | 300 | 724 |
| 355 | 21 1 | 32.2 | 27 | 373 | 444 | 54 | 300 | 735 |
| 400 | 23.7 | 36.3 | 30 | 427 | 500 | 60 | 300 | 750 |
| 450 | 26.7 | 40.9 | 34 | 470 | 563 | 68 | 300 | 770 |
| 500 | 29.7 | 45.4 | 37 | 530 | 625 | 74 | 350 | 885 |
| 560 | 33.2 | 50.8 | 42 | 585 | 700 | 84 | 350 | 910 |
| 630 | 37.4 | 57.2 | 47 | 642 | 788 | 94 | 350 | 935 |
| 710 | 42.1 | 64.5 | 53 | 737 | 888 | 106 | 350 | 965 |
| 800 | 47.4 | 72.6 | 59 | 840 | 1000 | 118 | 350 | 995 |
| 900 | 53.3 | 81.7 | 67 | 944 | 1045 | 134 | 100 | 535 |
| 1000 | 59.3 | 90.2 | 74 | 1047 | 1161 | 148 | 100 | 570 |
| 1200 | 67.9 | 109.1 | 89 | 1245 | 1393 | 178 | 100 | 645 |
Product Certificates
Case
Product: HDPE Turnery Puddle Flange
DN450mm SDR17 PN10
Location: France
